Nano Banana Pro Edit

Node type: edit:nano_banana_pro_edit
Category: edit
Hidden in sidebar: yes (auto-selected by routing)

Description

Nano Banana Pro image editing with precise instruction following

Pricing

• Cost: ~20 credits per images

Variant family

• Family: nano-banana-pro
• Is primary: no
• All variants: generate:nano_banana_pro, edit:nano_banana_pro_edit

Canvas ports

These appear as port handles on the left side of the node.

ID	Label	Details
prompt	Prompt	TEXT (required)
image1	Image 1	IMAGE
reference_image_urls	Reference Images	IMAGE · list

Sidebar config

These render as form fields in the right-side config panel when the node is selected.

ID	Label	Details
num_images	Number of Images	NUMBER · 1…4
enable_web_search	Enable Web Search	BOOLEAN
resolution	Resolution	TEXT · options: 1K, 2K, 4K
aspect_ratio	Aspect Ratio	TEXT · options: auto, 21:9, 16:9, 3:2, 4:3, +6
output_format	Output Format	TEXT · options: jpeg, png, webp
sync_mode	Sync Mode	BOOLEAN
limit_generations	Limit Generations	BOOLEAN

Outputs

ID	Label	Type
images	Generated Images	IMAGE

Reference images

Wire Reference Images once and hand it several images: it is a list port, so several wires into that one socket all survive, and so does a single upstream that emits several images.

Image 1 and the numbered Image 2..Image 10 slots go first, in slot order, and then everything on Reference Images, in wire order. The same URL wired into both a slot and the list keeps its slot position and counts once.

Whatever ends up first in the request is the image the model EDITS, and that is Image 1 only when Image 1 is wired. Leave Image 1 empty and wire Image 2 instead, and Image 2 becomes the image being edited. The numbered slots are read in slot order and an empty one is simply skipped. Wire the subject to Image 1.

The first 10 images reach the model. Anything past 10 is dropped, silently as far as the request goes, and the numbered slots win: if 10 slots are wired, nothing on Reference Images is sent. There is no run warning for the drop yet.

You do not need to stitch reference photos into one contact sheet any more, and you should not: stitching divides every face by the number of photos in the sheet before the model ever sees it.

Skip node passes Image 1 through while Image 1 is the ONLY numbered slot wired. It serves whatever is on Image 1, never a reference, and Reference Images can be wired alongside without changing that.

Wire a second numbered slot (Image 2 and up) and the card can no longer be skipped transparently: two numbered slots are two candidate sources and nothing on the card says which one to pass on, so Skip passes NOTHING and the run record says so per node. Leaving Image 1 empty passes nothing for the same reason. This is not new to Reference Images; a card with two numbered slots behaved this way before that socket existed.

---

Auto-generated from the Wireflow node registry.