Become a founding member.

FLUX 3 AI video generator

Copy agent promptDownload schemaOpen in a workflowCopy link

FLUX 3 is an AI video generator from Black Forest Labs. Black Forest Labs FLUX 3 video, direct from the source. Set it up below, then run it in a workflow or through the API.

Video~136 cr for 5s at default settings, up to ~443 cr for 20sBlack Forest Labs

One 5s hd clip is about 136 credits.

Input

13 fields

Result Idle

Your result will appear here.

Set your inputs, then open a workflow to create it.

Credit estimate uses the model defaults. Your workflow shows the final estimate for your inputs before you run.

Model guide

How to use FLUX 3

  1. Write a prompt that describes the shot.
  2. Add images or a video if you want to guide the result. This is optional.
  3. Pick the length (5 to 20 seconds) and the aspect ratio (21:9, 2:1, 16:9, 4:3, 1:1, 3:4 or 9:16).
  4. Choose Open in a workflow. Sign in, check the credit estimate on the board, then run it.
  5. Connect the result to the next step on the board, such as an editor or another model.

Inputs explained

Prompt (required)
Set the prompt used by this model. Type: text.
Start Image (optional)
Wire an image to animate it (image-to-video). Leave empty for text-to-video. Add an End Frame for a start-to-end pair, or extra Keyframes for a storyboard. Type: image.
Keyframe 2 (optional)
Optional extra keyframe. With 3 or more images wired (End Frame included), FLUX 3 runs as a storyboard and the keyframes are spread EVENLY across the chosen Duration: the first sits at 0s, the last at the end, the rest at equal intervals. Two images means first frame and last frame. Type: image.
Keyframe 3 (optional)
Optional extra keyframe. With 3 or more images wired (End Frame included), FLUX 3 runs as a storyboard and the keyframes are spread EVENLY across the chosen Duration: the first sits at 0s, the last at the end, the rest at equal intervals. Two images means first frame and last frame. Type: image.
Keyframe 4 (optional)
Optional extra keyframe. With 3 or more images wired (End Frame included), FLUX 3 runs as a storyboard and the keyframes are spread EVENLY across the chosen Duration: the first sits at 0s, the last at the end, the rest at equal intervals. Two images means first frame and last frame. Type: image.
Keyframe 5 (optional)
Optional extra keyframe. With 3 or more images wired (End Frame included), FLUX 3 runs as a storyboard and the keyframes are spread EVENLY across the chosen Duration: the first sits at 0s, the last at the end, the rest at equal intervals. Two images means first frame and last frame. Type: image.
End Frame (optional)
Optional last frame. With a Start Image wired, FLUX 3 interpolates from the start image to this one. Always counts as the LAST keyframe. Wiring it with no Start Image is refused before you are charged, because a single keyframe is read as the OPENING frame. Type: image.
Video to Extend (optional)
Wire a clip to continue it: FLUX 3 picks up from its final frames and carries the motion and framing forward with no cut. Video continuation is billed at a HIGHER rate than text- or image-to-video. Cannot be combined with keyframe images. that combination is refused before you are charged. Type: video.
Aspect Ratio (optional)
Set the aspect ratio used by this model. Type: text. Options: auto, 21:9, 2:1, 16:9, 4:3, 1:1, 3:4, 9:16. Default: "16:9".
Duration (seconds) (optional)
Set the duration (seconds) used by this model. Type: text. Options: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20. Default: "5".
Resolution (optional)
Set the resolution used by this model. Type: text. Options: HD, Full HD. Default: "hd".
Draft (fast preview) (optional)
Much faster and much cheaper (6 credits/second at any resolution), at lower quality. Use it to iterate on the prompt, then turn it off for the final render. Type: boolean. Default: false.
Generate Audio (optional)
Set the generate audio used by this model. Type: boolean. Default: true.

Tips before you run

Start with the default settings and change one input at a time. Keep the result you like on your board so the next step can use it.

If you add a reference file, use a link the workflow can read. Check the inputs and credit estimate on the board before starting a run.

FLUX 3 pricing

FLUX 3 costs about 136 credits per 5s, hd clip at default settings, and up to about 443 credits for 20 seconds. You pay with Wireflow credits, and the board shows the estimate for your settings before you run.

See Wireflow plans and credits

FLUX 3 vs Seedance 2.5

DetailFLUX 3Seedance 2.5
MakerBlack Forest LabsByteDance
Price at default settings~136 credits per 5s, hd clip~135 credits per 5s, 720p clip
Clip length5 to 20 seconds4 to 30 seconds
ResolutionNot listed480p, 720p or 1080p
Works fromA prompt, images or a videoA prompt, images, a video or audio
SoundYes, on by defaultYes, on by default

Both run on one Wireflow board, so you can try the same prompt on each. Try Seedance 2.5.

FLUX 3 API

Run FLUX 3 from your own code with the Wireflow API. Open it in a workflow, then call the run endpoint with that workflow's ID and poll for the result. Agents can run it through MCP.

# Model: FLUX 3. Open a workflow first.
# Replace YOUR_WORKFLOW_ID with the ID in its /flow/ URL.
curl 'https://www.wireflow.ai/api/v1/workflows/YOUR_WORKFLOW_ID/run' \
  -H 'Authorization: Bearer YOUR_WIREFLOW_API_KEY' \
  -H 'Content-Type: application/json' \
  -d '{"nodeIds":["model"]}'

# Response (202):
# {"data":{"executionId":"...","status":"running",
#  "poll":"/api/v1/workflows/executions/.../poll"}}
# GET the returned poll path with the same Authorization header.

Read the run API docs or connect your agent.

Read the FLUX 3 docs

Working with this model

One node, four modes, decided by the wires

There is no mode dropdown to get wrong. What you connect is the switch:

What you wireWhat it does
NothingText-to-video
Start ImageAnimates that image, using it as the first frame
Start Image + End FrameInterpolates from the first frame to the last
3 or more images (Keyframes and/or End Frame)A storyboard, spread across the clip
Video to ExtendContinues an existing clip with no cut

Behind the scenes those route to hidden video:flux_3_i2v and video:flux_3_extend variants, which is only worth knowing because of the pricing note below.

Keyframes are spread evenly, and that is the whole rule

With three or more images wired, FLUX 3 runs as a storyboard. The first image sits at 0 seconds, the last sits at the end of the clip, and everything in between is spaced at equal intervals. Four images across a 9 second clip land at 0, 3, 6 and 9 seconds.

Two things follow from that, and both surprise people once:

  • Changing Duration moves every middle keyframe. The images do not stay where they were.
  • The last image you wire is pinned to the final frame. Three images is a beginning, a middle and an ending, not "three beats and then whatever".

Wiring order is the port order: Start Image, then Keyframe 2 through 5, then End Frame last. Gaps are fine, so Start Image plus Keyframe 4 is just two images. There is no timestamp control yet; if you need one beat to land at a specific second, split the shot into two runs.

Extending a video costs more, and the node tells you before you run

Video to Extend takes a clip and carries it forward from its final frames, keeping the motion and framing. BFL bills continuation on a different rate table: 43 credits per second at HD against 17, or 12 in Draft against 6. The cost shown on the node already accounts for the wire, so the number you see is the number you pay. Unwire the clip and it drops back.

You cannot extend a video and use keyframe images in the same run. That combination is refused before you are charged rather than quietly ignoring one of them, because "quietly ignoring one of them" is how you spend the higher rate on a render you did not want.

An End Frame with no Start Image is refused for the same reason: a lone keyframe is read as the opening frame, so it would do the opposite of what the port says.

Draft mode is for iterating on the prompt

Draft renders at 6 credits per second at any resolution, instead of 17 (HD) or 29 (Full HD). Quality is lower. The point is to burn through prompt revisions cheaply, see the motion and the framing, then turn Draft off for the render you keep.

Resolution is ignored while Draft is on, for cost as well as output, so there is no reason to drop to HD to save money on a draft.

Duration is a fixed list, and you pay for all of it

Length is picked from 5 to 20 seconds and billed per second up front, so a 20 second render costs far more than a 5 second one. There is no "auto" option on purpose: BFL will pick a length for you, but then nobody can tell you what a run will cost before you press go.

Audio is generated, and it is on by default

FLUX 3 writes its own soundtrack for the clip. Turn Generate Audio off if you are going to lay your own audio over it in the video editor, otherwise you end up mixing two beds.

FLUX 3 FAQ

What is FLUX 3?

FLUX 3 is an AI video generator from Black Forest Labs. Black Forest Labs FLUX 3 video, direct from the source.

Is FLUX 3 free?

Running it uses Wireflow credits, about 136 credits per 5s, hd clip. You can set up the inputs here and open a workflow before you spend anything.

How much does FLUX 3 cost?

FLUX 3 costs about 136 credits per 5s, hd clip at default settings, and up to about 443 credits for 20 seconds. You pay with Wireflow credits, and the board shows the estimate for your settings before you run.

How long can FLUX 3 videos be?

FLUX 3 makes clips of 5 to 20 seconds.

Does FLUX 3 make sound?

Yes. It can make audio with the video, and that is on by default.

Can I use FLUX 3 commercially?

Yes. What you make with FLUX 3 on Wireflow is yours to use for personal and commercial work, subject to the model maker's own terms. Our terms of service have the details.

Does FLUX 3 have an API?

Yes. Save a workflow with FLUX 3, then call the Wireflow run API with its workflow ID. The API tab above has examples you can copy, and agents can run it through MCP.

How do I use FLUX 3?

Set the inputs above and choose Open in a workflow. Sign in to save your board, then check its credit estimate before you run.

More AI video models